A, product characteristics and applications

The light source characteristics:

Using osram original LED light source, high brightness, light failure is small, current allowance is big, the chip rated current is 200 ma, the actual use only 120 ma, the more increase the life of the lamps and lanterns and improve efficiency. The lamp bead has passed the certification of LM - 80.

The power features:

Using LED stadium lights dedicated power supply, the full range of input (AC90-305 v); Protection function: short circuit/over current/over voltage, over temperature; The built-in function of active power factor correction, when load ≧ 75% PF st13 0.9; Design of IP65. Power supply has passed TUV, UL, CB, CCC certification, etc.

Product features:

Module type structure, a single module can do 50 W, each module USES 48 1.2 W lamp bead, module 1.6 mm thick aluminum plate used high thermal conductivity aluminum plate, using the United States dow corning thermal conductive paste, coefficient of thermal conductivity above 2.0.

Two modules can be 100 w, the 96 3030 osram LED light source.

Three modules can be 150 w, the 144 3030 osram LED light source.

Four modules can be 200 w, the 192 3030 osram LED light source.

Radiator material: USES ADC12 die-casting forming, good heat dissipation, temperature rise shall not exceed 35 degrees of lamps and lanterns.

Lens material: with German bayer raw material and anti-uv material, has excellent resistance to impact and good light resistance and temperature tolerance, make products to greatly enhance the service life.

Waterproof strip: the United States dow corning corporation material, has excellent weather resistance, vibration proof, moistureproof, high and low temperature resistance and other properties, from 60 ℃ - 180 ℃ between stable and have a play, make the product can really reach the grade IP66 waterproof.

Lamps and lanterns light Angle can choose: 30 ゜, ゜ 60, 90 ゜, 80 * 140 ゜ light Angle, etc.

The whole lamp shell surface spray powder processing, outdoor corrosion resistance is strong. Screw is made of stainless steel screws and parts (3014).

Level of product protection grade reaches IP65, anti-collision: IK08.

Installation method: hoisting, u-shaped bracket installation, wall.

Second, the energy saving features:

100 w LED project-light lamp brightness is equivalent to 250 w high pressure sodium lamp brightness (including ballast power), power saving rate of more than 67%.

Three, product and application

Applicable to landscape lighting lighting places, factory, warehouse and other places lighting needs.

Four, the product structure

Five main parameters, product

The project name specification unit

100-305 - V AC input voltage V

Product power (100 W, 150 W, 200 W, 240 W) W

Power efficiency / 90%

Power factor above 0.9 PF

Light Angle of 30 ° to 60 °, 90 ° 80 * 140 ° degrees

Color temperature WW / 2700-3000 - NW/PW / 5500-6000, 4000-4500 k

Photosynthetic efficiency, 105, 110, 110

Color rendering index > 80 Ra

Working temperature - 20 ~ + 40 ℃

Six, continuous